1 | NOTICE BEFORE USING Thank you for purchsing the RoadKing BLUETOOTH Headset RKING940. Please read ® ® this User Manual completely before using the headset. RKING940 is based on the latest BLUETOOTH wireless technology and is compliant with a BLUETOOTH with BLUETOOTH v5.0 specifications.
3 | PACKAGE CONTENTS LIST Please inspect this package and refer to the package contents list below to verify all items were included in this package. A. RKING940 RoadKing BLUETOOTH Headset ..............1 B. AC Wall Charger .........................1 C. DC Car Charger ........................1 D.
Page 5
4 | RKING940 BLUETOOTH HEADSET OVERVIEW ® Adjustable Headband Speaker/Ear Pad Volume (+) Volume (–) Flexible Arm Windproof Microphone Boom Indicator Light (LED) On/Off Button Charging Socket...
5 | BATTERY INFORMATION The device is equipped with an integrated lithium-polymer battery. The battery cannot be replaced. Do not attempt to remove the battery from the device since it would damage the device. The full performance of a new battery is not achieved until after two or three complete charge/discharge cycles.
6 | CHARGING THE BATTERY RKING940 is operated with a rechargeable battery. Charge the battery completely before its first use. Read the previous section “Battery Information” before starting the charging process. 1. Connect the charger to the correct outlet. 2. When the charger is connected to the headset, the Red indicator light will turn on. Charging the battery fully may take up to 3 hours.
7 | PAIR TO YOUR BLUETOOTH ENABLED DEVICE ® Before you use your headset for the first time you must pair the unit with a BLUETOOTH enabled device. Pairing is a one-time process and rquired only for the first connection with the BLUETOOTH enabled device.
Page 9
8 | MULTI-CONNECTION FUNCTION The multi-connection function allows for the simultaneous use of RKING940 with two devices. Establishing a connection with two devices: There are several options of connecting RKING940 with already paired devices. 1. Automatic connection: When turning on RKING940, a connection is automatically established with the two most recently connected devices.
3. Establishing a connection via the device: If the device is not one of the two most recently connected devices with RKING940, you have to establish the connection via the BLUETOOTH menu on that device. After connected successfully, you can ®...
Page 11
Connecting to a BLUETOOTH device: Once your headset has completed the pairing ® process successfully, and the headset is turned on, it will connect to the phone you last connected with automatically (“connected”). Please ensure your device’s BLUETOOTH function is turned on. Turning off the headset: At any working state after the headset is powered on, press and hold On/Off for 3 seconds.
10 | WEARING YOUR HEADSET According to your preference, you can wear the headset on your left or right ear. The adjustable headband design allows for a comfortable fit. ...
Page 13
11 | USING RKING940 Making a call: • Using device: In standby mode, dial the number on your device to make a call • Using voice dialing: In standby mode, press the On/Off button quickly. You will hear a short tone from the headset, and your device will prompt you to say the voice tag which you have already attached to your contact.
Page 14
Answering a call: When you receive an incoming call, press the On/Off button to answer. Rejecting a call: When you receive an incoming call, press and hold the On/Off button for 2 seconds to reject the call. Transferring a call: While a call is in progress, press and hold Volume (+) for 2 seconds. The call will be transferred from your phone to your headset.
Page 15
• While a call is on hold and you are on another call, press On/Off quickly to end the current call and resume the call holding. • While a call is on hold and you are on another call, press and hold On/Off for 2 seconds to shift the current call to hold and connect you with the previously held call.
Music streaming: RKING940 supports A2DP profile that allows for wireless streaming of music from a BLUETOOTH enabled device. Music will pause while a call is dialed or received, and resume when the call has ended. 12 | RESET RKING940 RKING940 can be paired with up to eight devices. You can delete the pairing list and reset the headset to the factory settings by doing the following: •...
4. Do not place or keep this device near any heat source, such as direct sunlight, radiators, stoves or other apparatus that produces heat. This may cause an explosion, degrade the performance and/or reduce battery life. 5. Do not modify, repair or disassemble device (especially the battery). Doing this will void the warranty.
15 | WARRANTY This 1 Year Limited Warranty from RoadKing, a DAS Company applies to all electronic products and devices manufactured by RoadKing and sold under the brand name RoadKing. Visit www.roadkingproducts.com for warranty details. Terms of the Warranty: RoadKing warrants that the product you have purchased from a DAS authorized retailer is free from defects in materials and workmanship under normal use during the warranty period (1 year).
Page 19
Defective products must be returned to the dealer within 30 days. After 30 days, the product may be returned to RoadKing. When returning products to RoadKing: Shipping to RoadKing shall be prepaid; your replacement will be mailed back to you at no additional charge. Carefully pack product and all included accessories into a suitable box, along with original dated register receipt or invoice, a letter stating the defect, daytime phone number, and a physical address.
Page 20
RoadKing® and RoadPro® are registered trademarks of DAS Companies, Inc. The BLUETOOTH® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by DAS Companies, Inc. is under license. All other trademarks registered trademarks, copyrights and logos are the property of their respective owners.