Table of Contents
Advertisement
54
Running the Adaptec SCSISelect Utility
Each host adapter includes an onboard SCSISelect configuration utility
that allows you to configure/view the settings of the host adapter and
devices in the server.
The system finds the Adaptec SCSI host adapter and displays the
message Adaptec SCSI BIOS V x.xxx where x.xxx is the version number
of the SCSISelect utility.
Pressing <Ctrl+A> at this time allows you to configure the Adaptec AIC-
7XXX SCSI host adapter.
When to Run the Adaptec SCSISelect Utility
Use the SCSISelect utility to:
•
Change default values
•
Check and/or change SCSI device settings that may conflict with
those of other devices in the server
•
Do a low-level format on SCSI devices installed in the server
Running the SCSISelect Utility
1
When this message appears on the video monitor:
<<<Press <Ctrl><A> for SCSISelect(TM) Utility!>>>
2
Press <Ctrl+A> to run the utility. When the main menu for the host
adapter appears, choose the device that you want to configure-
each SCSI bus accepts up to 15 devices.
Use the following keys to navigate through the menus and submenus:
Press
ESC
Enter
↑
↓
4 Configuration Software and Utilities
To
Exit the utility
Select an option
Return to previous option
Move to the next option
Advertisement
Table of Contents
