CLEANING THE THERMAL PRINTHEAD.
•
When the thermal print head gets dirty, defects such as unwanted lines may appear on the printed card.
•
The print head should be cleaned after approximately 10,000 dye panels, dependant on environment.
•
Ensure printer is powered off.
1. Open the printer front door and remove the ribbon
cassettes.
CLEANING THE FAN FILTERS.
•
When the fan filters become dirty particles of dust may begin to appear on the card surfaces.
•
It is recommended to clean the filters after 10,000 cards, or dependant on printer environment.
•
Ensure the printer is powered off for this action.
1. Remove the fan filters located in two positions on
each side of the printer.
Prima Cleaning Instructions
A
Print head surface, (print head removed for reference
only).
B
Platen Roller.
2. Platen roller must to be wiped with the alcoholic cloths
supplied in the cleaning kit.
3. Re-fit ribbon cartridges and power on the printer.
2. Remove the card tray and cleaning
cassette.
www.ultramagicard.com