Advertisement
Quick Links
Before carrying out cleaning of the Prima printer, a cleaning kit will need to be ordered. This can be ordered
through your dealer network.
ROLLERS.
•
Dirty rollers are the major cause of jamming cards in the printer.
•
It is recommended to clean the rollers after printing 1000 cards – dependant upon environment.
•
You must also allow the printer to cool before the cleaning cycle.
5. Press "Enter" on the printer menu, this will start the
rollers turning.
NOTE:
Prima Cleaning Instructions
A
B
C
D
AT THIS POINT IF THE PRINTER IS
TOO HOT YOU WILL BE
PROMPTED "HR IS TOO HOT"
(HEATED ROLLER IS TOO HOT).
Cleaning Pads for the rubber rollers.
Cleaning swab for the thermal print head.
Pack of 10 sticky cleaning cards for the printer rollers.
Cleaning card with the backing partially removed.
1. Remove both ribbon cassettes.
2. Switch the printer on, it will initialise however the "No
Cassette" error will show.
3. At this point press the "MENU" button three times to
show the cleaning menu.
4. Press "Enter" to open the cleaning menu. On a
standard printer you will only have the option to clean the
rollers; on a Mag/Chip printer you will have the option to
clean the Magnetic encoding head also.
www.ultramagicard.com
Advertisement
Summary of Contents for Prima Prima
- Page 1 Prima Cleaning Instructions Before carrying out cleaning of the Prima printer, a cleaning kit will need to be ordered. This can be ordered through your dealer network. ROLLERS. • Dirty rollers are the major cause of jamming cards in the printer.
- Page 2 Prima Cleaning Instructions 6. Remove the backing from the cleaning card. 7. Insert the card from the right hand side slot when looking from the front of the printer, sticky side down. CLEANING ROLLER ASSEMBLY. • The sticky rollers remove dust and debris from the card surface.
- Page 3 When the fan filters become dirty particles of dust may begin to appear on the card surfaces. • It is recommended to clean the filters after 10,000 cards, or dependant on printer environment. • Ensure the printer is powered off for this action.
- Page 4 5. Press “Enter” and the cleaning routine will commence. 6. After the routine the card will be fed from the right side of the machine. Turn the printer off and back on again after 10 seconds. www.ultramagicard.com...