Table of Contents
Advertisement
Touch the grey box associated with the year. 2 blue arrows will appear. Touch the blue
arrow on the left to decrease the year. Touch the blue arrow on the right to increase in the
year. Adjust the year by touching the arrows until it is correct.
Similarly, touch the grey boxes associated with the month and day and use the arrows to
adjust the month and day settings until they are correct
Set the hour, minutes, and pm/am in the same manner.
When you are satisfied that all of the settings are correct, press the checkmark icon on the
bottom right corner of the screen. To cancel your changes and return to the home screen,
press the "X" icon at any time.
Your TITAN-Ox™ has been pre-programmed to backwash every 10 days or 3,000 gallons
(whichever occurs first) and to perform the backwash process at 12:30am in the morning
when it is very unlikely that water will be required in the building. If water is required during
the backwash process, untreated water will be permitted to flow to meet your service needs.
You may edit the frequency and duration of the backwash based on your water conditions.
You may also alter the time of day that the backwash process occurs if 12:30am is not ideal
for you. If you have a water softener or other automatic backwashing water treatment
systems, make sure that they are not set to regenerate at the same time. We recommend
that they backwash/regenerate at least 2 hours apart. Follow the instructions under
"Changing Basic Settings" to change the frequency or backwash time if desired. If you want
to change the duration of the backwash or final rinse cycles, these settings must be edited in
the "Master Settings Mode" – see below for details.
19
Advertisement
Table of Contents
