Advertisement
Quick Links
THANKS FOR PURCHASING YOUR STAR NIGHT LASER.
Please read this manual carefully before operating the system. It provides general
information for your safety and optimal performance. The Star Night Laser
is for outdoor and indoor use and its enclosure is IP-65 weather resistant rated.
NO LASERS SHOULD BE POINTED TO THE SKY WITHIN 10 NAUTICAL MILES OF AN AIRPORT.
CHECK WITH LOCAL AIRPORTS OR COUNTY GUIDELINES FOR FURTHER INFORMATION.
This unit is the "original" model of the Star Night Laser collection. Be prepared to be amazed
by the thousands of red and green laser lights that the unit will project, and choose
The Star Night Laser can be used as landscape or home accent lighting.
home's exterior. The Star Night Laser will project over 1000 laser dots!
CAUTION & WARNINGS:
• Please read through the instruction manual before use.
• DO NOT use the product if damaged. Laser unit, cords, timer, adapter and plugs must not
be damaged in any way prior to use.
• This product is not a toy. Please keep this unit out of the reach of children and pets.
• Close supervision is necessary when this product is used by invalids, or disabled
persons, or near children.
• Star Night Laser is a CLASS IIIa laser product. Do not stare into the beam of Class IIIa laser
products or view directly with optical instruments.
• Keep at least 0.5 meters (approximately 2 feet) distance between the light and flammable materials.
• Ingress protection: Enclosure is IP-65 weather resistant rated. DO NOT submerge in water.
Rainy day use is acceptable.
• Power off before installation or maintenance.
• Use this product only for the intended use as described in these instructions. Disconnect this
product from power immediately in case of malfunction.
• Voltage ranges from 100V to 120V. Suggestion: use regulator to prolong the lifetime
of the laser lighting.
• DO NOT open unit.
• Avoid direct eye exposure.
• Do not tamper, change, or modify the product in any way. Doing so will void the
warranty and may put you at risk of injury.
* Directly viewing a Class IIIa laser can be hazardous according to US Federal Laser Product Performance Standard
(FLPPS) regulations in 21 CFR chapter I, Subchapter J, CFR1040.10 and 1040.11
USER MANUAL
from 1 of the 8 programs. Your Star Night Laser will automatically
activate each night and turn off after 6 hours.
Project your Star Night Laser into trees or directly onto your
CAUTION
Max Output < 2.5mW
WAVELENGTH: 532nm – 650nm
Class IIIa LASER PRODUCT
This device complies with 21 CFR chapter I,
Subchapter J, CFR1040.10 and 1040.11
Not a Toy. Keep out of
reach of pets & children.
Advertisement
Related Manuals for Laser Green Laser
Summary of Contents for Laser Green Laser
- Page 1 • Close supervision is necessary when this product is used by invalids, or disabled persons, or near children. • Star Night Laser is a CLASS IIIa laser product. Do not stare into the beam of Class IIIa laser products or view directly with optical instruments.
- Page 2 INSTALLATION: 1. Insert the Star Night Laser unit and stake into the ground facing the area to be illuminated. 2. Adjust the projection angle of the laser by adjusting the side screw. Loosen screw, adjust, and then tighten screw.
- Page 3 Hold for 3 sec. and unit turns off 5. Static Red & Green 4. Star Night Laser will turn off after 6 hours and turn on again automatically the next night. 5. Star Night Laser will restart at the last mode selected.
- Page 4 The manufacturer warrants that your Star Night Laser™ is free of defects in materials and workmanship and will, at its option, repair or replace any defective Star Night Laser™ that is returned. All parts and components are warranted for 60 days from the date the product is received. This warranty is valid only in accordance with the conditions set forth below: Normal wear and tear are not covered by this warranty.