Table of Contents
Advertisement
2: System and RF Planning
In this context, you can easily install up to five cells. By respecting the following steps, you
can assume that the cells will not share the same frequency channel, making the complete
bandwidth available for each one. You have to:
1. Assign a different wireless passkey to each cell.
2. Ensure that all S1100 masters "see" one another. For the procedure, see Appendix E on
page 63.
3. Position the devices so that there is at least 3 feet (1 meter) between each antenna.
4. In each master device, set a different starting order: 1 for the first device, 2 for the
device next to it, 3 for the third one, and so on.
Installing more than five cells in the 5.40–5.725 GHz band requires the use of adjacent
channels. This situation demands greater distances between the antennas to reduce
potential radio interference. Therefore, you should contact the Verint Video Intelligence
Solutions project engineering group for assistance.
Supported Setups
The following colocated systems are supported in the 5.40–5.725 GHz band:
A point-to-point repeater for one or more pairs of S1100 devices, with or without
hidden nodes. Both master devices see each other.
Multiple point-to-point applications. The S1100 master devices (the receivers) see each
other.
S1100-T 1
14
Repeater
S1100-R 1
S1100-R 2
S1100-T 2
Verint Video Intelligence Solutions
Advertisement
Table of Contents
