How To Operate - Ginnys 740553 User Manual

BEFORE FIRST USE, RUN ONE BREW CYCLE WITH CLEAR WATER:
1. Fill the carafe with 12 cups of with cool water and pour it into the water
reservoir.
2. Make sure the basket and coffee filter are properly seated under the
coffee lid and the handle on the basket is down.
3. Plug the coffee maker into an electrical outlet. Ideally, the coffee maker
should be operated on its own circuit, separate from other appliances.
The display screen light will flash, then display the clock.
4. Press BREW/OFF. The BREW/OFF light will turn on, and the display will
show a dot next to BREW. The brew cycle will begin. This will take
approximately 9 to 12 minutes to complete.
5. After the cycle is complete, the coffee maker will beep twice and the
BREW/OFF light will turn off. The coffee maker will switch to keep warm.
After 2 hours, the coffee maker will automatically shut off.
SETTING THE CLOCK:
1. The clock must be set for the programming functions to work. When set,
the time will appear in the digital display.
2. To set the hour, press HOUR to advance one hour at a time.
Hold the button to rapidly advance the hours. The hours will only count
upward. Make note of the AM and PM indicator when setting the hour.
3. To set the minute, press MIN to advance one minute at a
time. Hold the button to rapidly advance the minutes. The minutes will
only count upward.
4. After setting the time, wait 3 seconds and the display will stop flashing.
The time is now set.
6

HOW TO OPERATE

Ginnys.com 800-544-1590