D-Link DWA-182 User Manual page 15

Section 4 - Connect to a Wireless Network
To connect to the network, click Connect.
To automatically connect when your device is in range, click the Connect Automatically
check box. Your computer will now automatically connect to this wireless network whenever
it is detected.
You will then be prompted to enter the Wi-Fi password (network security key) for the wireless
network. Enter the password into the box and click Next to connect to the network.
You can also use Wi-Fi Protected Setup (WPS) to connect to the wireless network. Press the
WPS button on your device and you will be automatically connected.
It may take 20-30 seconds to connect to the wireless network. If the connection fails, please
verify that the security settings are correct. The key or passphrase must be exactly the same
as the one on the wireless router.
D-Link DWA-182 User Manual 15