If the name of the WiFi network to be connected is hidden, you can perform the following
procedure to connect to the WiFi network:
Step 1
Obtain basic information about the WiFi network. Assume that the following
information is available:
WiFi name:Tenda_01
Security mode: WPA2-PSK
Step 2
Set the information manually to connect to the WiFi network.
Step 3
Access the UI of the wireless USB adapter and click Add a WiFi network.
Encryption type: AES
WiFi password: 12345678
15
Set WiFi Name to the name of the WiFi network to be connected, which is Tenda_01 in this
example.
Select the security mode of the WiFi network from the Security Mode drop-down list box,
which is WPA2-PSK in this example.
Select the encryption type of the WiFi network from the Encryption Type drop-down list
box, which is AES in this example.
Set WiFi Password to the password of the WiFi network to be connected, which is
12345678 in this example.
Click
.
16