Amcrest BC911M14 Manual

Setup
1

Camera Setup

1
.1 Power Supply - Using AC Power
1. Plug one end of the provided power adapter into a wall outlet and the other
end into the back of the camera.
2. Press the ON/OFF button to turn on the camera. The LED (green light) on the camera
will light up.
Note : Press and hold the ON/OFF button for about 2 seconds to turn off
the camera.
1
.2

Night Vision

The camera has eight high-intensity LEDs for picking up clear images in the dark.
When the light sensor detects low ambient light levels, the LEDs will be automatically
activated. Press the brightness up button
the monitor unit to enable/disable/auto the night vision function.
The on-screen-display (OSD) will notify you the night vision function is set to
ON/OFF/AUTO.
2

Monitor Setup

2
.1

Power Supply

The monitor uses a Lithium-ion rechargeable battery, or the household power
adapter.
Using AC Power
1. Plug one end of the provided power adapter into a wall outlet and the other end
into the monitor.
2. Press the POWER button
Note 1 : When power on the monitor, the LED (green light) will light up.
Note 2 : Press and hold the POWER button
monitor.
Loading the Battery
1. Open the battery compartment cover on the rear of the monitor.
2. Insert the battery with the metal facing the battery compartment.
3. Close the battery compartment cover, and make sure it is locked securely.
4. Press the POWER button
Battery Charging
When Battery is in low level after loading the battery, the LED (greed light) will start
blinking and need to recharging.
1. Plug one end of the provided power adapter into a wall outlet and the other end
into the monitor.
2. The LED (red light) will light up when the battery is charging .
3. When battery is fully charged, the LED (red light) will turn off .
and down button
and to turn on the monitor.
for about 2 seconds to turn off the
to turn on the monitor.
2
at the same time on