Alesis STRIKE User Manual page 14

Parameter Description
EQ EQ lets you "boost" or "cut" low and high frequencies of the
kit's sound to change its sound.
This determines how much the equalizer's low-frequency
LF Gain
band is boosted or cut.
This determines the equalizer's low frequency.
LF Freq
HF Gain This determines how much the equalizer's high-frequency
band is boosted or cut.
HF Freq This determines the equalizer's high frequency.
Comp Comp applies compression to the kit's sound (decreasing
the dynamic range of the sound to make it more consistent).
Threshold This determines the volume at which compression will be
applied to the sound. In other words, when the volume of
your playing reaches or exceeds this volume level, it will
trigger the compressor.
This determines the volume of the compressed signal.
Output
FX1, FX2 The FX processors let you select from different types of
flanger, chorus, vibrato, and delay effects.
This is the type of effect.
Type
Parameters The available parameters will depend on the type of effect.
Values/Settings
-60 to 00 to +12dB
20 Hz – 18.5 kHz
-60 to 00 to +12dB
20 Hz – 18.5 kHz
-90 to 00dB
20 Hz – 18.5 kHz
See Appendix > Effects
See Appendix > Effects
14