Table of Contents
Advertisement
Route the MAIN antenna cable (1) (labeled with the number 5 or
5.
with a red band) as shown in the illustration, and then connect it to
the MAIN terminal (2) on the wireless module.
To avoid damaging the antenna connector, do not
CAUTION:
insert the connector at an angle. Instead, firmly press it straight down
until it snaps into place.
Be sure that the antenna cable is routed through the channel
NOTE:
in the frame of the computer so that it does not obstruct the SIM detect
switch (3) or lie across the raised edge of the frame.
Installing the wireless module in model nc6400 and model 6910p
11
Advertisement
Table of Contents
