Lexus NX300 Owner's Manual page 207

operated
Large adjustment: Increases or decreases
in 1mph (1.6 km/h)
increments for as long as the lever is held
For Canada, Guam and Puerto Rico

Fine adjustment: By 1 mph (1.6 km/h)
*2
km/h (0.6mph)
operated
Large adjustment: Increases or decreases
in 5 mph (8 km/h)
increments for as long as the lever is held
In the constant speed control mode
(→P.211), the set speed will be
increased or decreased as follows:
Fine adjustment: By 1 mph (1.6 km/h)
*2
km/h (0.6 mph)
operated
Large adjustment: The speed will continue
to change while the lever is held.
*1
: When the set speed is shown in "MPH"
*2
: When the set speed is shown in "km/h"
Changing the vehicle-to-vehicle
distance (vehicle-to-vehicle dis-
tance control mode)
Pressing the switch changes the vehi-
cle-to-vehicle distance as follows:
LEXUS NX300
al_USA_OM78211U
4-5. Using the driving support systems
*1 *2
or 1 km/h (0.6 mph)
*1
or 1
each time the lever is
*1 *2
or 5 km/h (3.1 mph)
*1
or 1
each time the lever is
Owners Manu-
1 Long
2
Medium
3
Short
The vehicle-to-vehicle distance is set auto-
matically to long mode when the engine
switch is turned to IGNITION ON mode.
If a vehicle is running ahead of you, the pre-
ceding vehicle mark A will also be dis-
played.
Vehicle-to-vehicle distance set-
tings (vehicle-to-vehicle dis-
tance control mode)
Select a distance from the table below.
Note that the distances shown corre-
spond to a vehicle speed of 50 mph
(80 km/h). Vehicle-to-vehicle distance
increases/decreases in accordance
with vehicle speed. When the vehicle is
stopped by system control, the vehicle
stops at a certain vehicle-to-vehicle
distance depending on the situation.
209
4