192
4-5. Using the driving support systems
WARNING
If the vehicle cannot be driven in a sta-
●
ble manner, such as when the vehicle
has been in an accident or is malfunc-
tioning
●
When the vehicle is driven in a sporty
manner or off-road
●
When the tires are not properly
inflated
When the tires are very worn
●
When tires of a size other than speci-
●
fied are installed
●
When tire chains are installed
●
When a compact spare tire or an
emergency tire puncture repair kit is
used
●
If equipment (snow plow, etc.) that may
obstruct the radar sensor or camera
sensor is temporarily installed to the
vehicle
Changing settings of the pre-col-
lision system
Enabling/disabling the pre-colli-
■
sion system
The pre-collision system can be
enabled/disabled on the multi-informa-
tion display as following:
The system is automatically enabled each
time the engine switch is turned to IGNI-
TION ON mode.
1
Press "
" or "
trol switches and select
2
Press "
" or "
trol switches and select
press
.
LEXUS
NX300
al_USA_OM78211U
" of meter con-
.
" of meter con-
, and
Owners
Manu-
3
Press "
" or "
" of meter con-
trol switches and select "PCS", and
press
to select the desired set-
ting (on/off).
If the system is disabled, the PCS warn-
ing light will turn on and a message will
be displayed on the multi-information
display.
Changing the pre-collision warn-
■
ing timing
The pre-collision warning timing can
be changed on the multi-information
display as following:
The operation timing setting is retained
when the engine switch is turned off.
1
Press "
" or "
" of meter con-
trol switches and select
2
Press "
" or "
" of meter con-
trol switches and select
press
.
3
Press "
" or "
" of meter con-
trol switches and select "Sensitiv-
.
, and