Huawei SUN2000-25KTL-US Quick Installation Manual page 6

3. Secure the rear panel.
5. Tighten hexagon bolts.
NOTE
The anti-theft lock is prepared by the customer.
Installed on a Tilted Support
1. Prepare a tilted support.
Top view
NOTE
1. The hole dimensions of the bottom auxiliary tightening point in the top view are OB-13 mm x 8
mm (OB-0.51 in. x 0.31 in.).
2. The hole dimensions of the tightening point for the tilted support mounting kit in the front view
are OB-32 mm x 12 mm (OB-1.26 in. x 0.47 in.).
3. The auxiliary tightening point is 5 mm (0.20 in.) away from the lower tightening point for the tilted
support mounting kit.
M12 (3 PCS)
45 N· m
Front view
5
4. Mount the inverter on the rear panel.
6. (Optional) Install an anti-theft lock.
Side view