Remove three screws
4
Step
Screw (quantity)
4
M2 × 3mm, flat-head, nylon-coated (3)
When installing:
Ensure that the OneLink board is firmly attached.
Removal steps of the power board (for the models without OneLink+ dock port)
Open the socket
1
, and then pull out the power cable
Remove two screws
3
, and then remove the power board
Step
Screw (quantity)
3
M2 × 3mm, flat-head, nylon-coated (2)
When installing:
Ensure that the power board is firmly attached.
80
Hardware Maintenance Manual
, and then remove the OneLink board
5
.
Color
Black
2
.
a
b
4
.
Color
Black
Torque
1.85 +/- 0.15kgf-cm
Torque
1.85 +/- 0.15kgf-cm