When installing:
Ensure that the thermal fan assembly and heat sink assembly are firmly attached.
1130 Speaker assembly
For access, remove these FRUs in order:
•
"1010 Optical disk drive/Removable battery" on page 66
•
"1020 Base cover assembly" on page 68
•
"1040 Battery pack" on page 70
Removal steps of the speaker assembly
Detach the speaker cable connector
by arrow
2
.
When installing:
Ensure that the speaker assembly is firmly attached.
1140 Power board/ OneLink board
For access, remove these FRUs in order:
•
"1010 Optical disk drive/Removable battery" on page 66
•
"1020 Base cover assembly" on page 68
•
"1040 Battery pack" on page 70
Removal steps of the OneLink board (for the models with OneLink+ dock port)
Open the socket
1
, and then pull out the power cable
Detach the OneLink+ dock port cable connector
1
, and then carefully remove the two speakers in the direction shown
b
a
2
.
3
.
b
c
a
b
.
Chapter 9
Removing or replacing a FRU
79