Specification Product name LIFEDETECT Model name MS01 Working temperature -5℃ ~ +40℃ Working humidity 0~95%RH, no condensation Detection range Horizontal detect angle 110° Battery model CR2450 Battery life > 2 years Operating frequency 2.4 GHz Transmitted power 8±2dbm...
Getting to Know Your LIFEDETECT LIFEDETECT is a Zigbee infrared detection sensor which can detect humans and large animals. It is designed to work together with a LIFECONNECT device. You can place it on a desk or install it on a wall using adhesive or screws.
Page 5
Connecting Your LIFEDETECT 1. Make sure that LIFECONNECT is connected to your router. 2. Open your LIFE App, log in your account and select “+” in the App. Follow the on-screen instructions in the App to add and configure your LIFEDETECT.
Page 6
4. Remove the protective film from the lens. 5. If you have added your LIFEDETECT successfully, you will see the LIFEDETECT home page in your LIFE App. If it has not been added, please use the pin to long press the reset hole for 3 seconds until it flashes blue, then add the LIFEDETECT again in the App.
Page 7
2. Long press the reset hole for more than 3 seconds. 3. Press '+' and follow the instructions within the App. 4. Stand in front of your LIFEDETECT and check for a message in the App to ensure it is working correctly.
LIFECONNECT is 5~10 m. Desktop Installation Place your LIFEDETECT on the table close to the edge and aligned with the area which you want to detect. Please try to ensure that it is close to the edge of the table or cabinet.
Page 9
Wall Installation Mount your LIFEDETECT on a smooth wall using the provided adhesive or screw. Desktop Installation Wall Installation 0.5~1.5m 0.5~1.5m...
, t h e d e t e c t i o n r a n g e w i l l be inverted. Please position your LIFEDETECT in such a way to best meet your requirements.
Page 11
4. Avoid installation near water vapor or in areas of high humidity. 5. Avoid curtains or screens which might block the detection area. 6. Please don’t install your LIFEDETECT in an unstable or vibration prone area. 7. Please don’t include continuously moving objects within the detection area (e.g.
Page 12
4. Q: Is my LIFEDETECT water and dust proof? A: No. The device is not water or dust proof. 5. Q: If I place my LIFEDETECT at a lower height will it still work? A: If you plan on placing your LIFEDETECT at a low height (< 0.5 m), it is recommended to place it upside down, with the top of the device facing the ground.
Safety and Use Electronic Devices Turn off your device near high-precision electronic devices. The wireless device may affect the performance of these devices. Such devices include hearing aids, pacemakers, fire alarm systems, automatic gates, and other automatic devices. If you are using an electronic medical device, consult the device manufacturer to confirm whether radio waves affect its operation.
Page 14
cooker or a microwave oven. Otherwise, circuit failure, fire, or explosion may occur. • Do not leave your wireless device in a very hot or cold place. Malfunction of the product, fire, or explosion may occur. • Do not subject your wireless device to serious collision or shock. Wireless device malfunction, overheating, fire, or explosion may occur.
Page 15
may occur. • The wireless device may interfere with nearby TV sets, radios, and PCs. • In accordance with international standards for radio frequency and radiation, use wireless device accessories approved by the manufacturer only. Traffic Safety When driving, do not use the wireless device. •...
Page 16
• When this device is switched on, it should be kept at least 20 cm from the body. • When this device is switched on, it should be kept at least 15 cm from any medical device such as a pacemaker, a hearing aid or insulin pump, etc.
Page 17
Certification This symbol on the device means that these products must be taken to collection points at the end of their life: - Municipal waste disposal centers with specific bins for these types of equipment. - Collection bins at points of sale. They will then be recycled, preventing substances from being disposed of in the environment and allowing their components to be reused.
Radio Waves THIS DEVICE MEETS THE GOVERNMENT’S REQUIREMENTS FOR EXPOSURE TO RADIO WAVES. Your device is a radio transmitter and receiver. It is designed and manufactured not to exceed the emission limits for exposure to radio-frequency (RF) energy. These limits are part of comprehensive guidelines and establish permitted levels of RF energy for the general population.
Page 19
harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:...
Page 20
These precautions will help prevent unauthorized access to your device. Choose your apps and updates carefully, and install from trusted sources only. Note that any data shared with TCL Communication Ltd. is stored in accordance with applicable data protection legislation. For these purposes TCL Communication Ltd.
Page 21
- The sensitivity of the personal data processed. You can access, review and edit your personal information at any time by logging into your user account, visiting your user profile or by contacting us directly. Should you require us to edit or delete your personal data, we may ask you to provide us with evidence of your identity before we can act on your request.
Page 22
- This device may not cause interference, and; - This device must accept any interference, including interference that may cause undesired operation of the device. This Class B digital apparatus complies with Canadian ICES-003. Innovation, Science and Economic Development Canada (ISEDC) Radiation Exposure Statement This EUT is compliance with SAR for general population/uncontrolled exposure limits in ISEDC RSS-102 and had been tested in accordance...
Warranty The device is warranted against any deviation from technical specifications for a period of twelve (12) months from the date specified on your original invoice. Batteries and accessories sold with your device are also warranted against any defect which may occur during the first six (6) months from the date of purchase as shown on your original invoice.
Page 24
4) Accidents or consequences of theft of the vehicle in which this device is transported, acts of vandalism, lightning, fire, humidity, infiltration of liquids, inclement weather. 5) Connecting to or integrating into this device any equipment not supplied or not recommended by the manufacturer. 6) Any servicing, modification or repair performed by individuals not authorized by the manufacturer, the vendor or the approved maintenance center.
Need help?
Do you have a question about the LIFEDETECT and is the answer not in the manual?
Questions and answers