Table of Contents
Advertisement
Media Converter
Installing in a Chassis
The Converter can be fit into any of the expansion slots on a special
designed chassis.
First, install the converter onto a carrier supplied with the chassis:
Step 1- Unscrew the carrier from the desired expansion slot on the chassis.
Step 2-
Fit the converter onto the carrier.
When the converter is completely seated onto the carrier, insert the carrier
to the guide rails of the expansion slot.
Carefully slide in the carrier until it is fully and firmly fit the chassis. Fasten
the screws on the carrier.
<NOTE>
Never insert any converter into the chassis directly without using the
supplied carriers. The carriers allow secure and consistent placement
of the converters into the chassis' backplane without causing any
damage.
7
User's Manual
Advertisement
Table of Contents
