Media Converter Preface This manual describes how to install and use the Fast Ethernet Media Converter. The Converter introduced here provides one channel media conversion between 100Base-TX and 100Base-FX. Converter fully complies with IEEE802.3u 100Base-TX/FX standards. In this manual, you will find: Product overview Features on the media converter Illustrative LED functions...
Media Converter Introduction The media converter provides one channel for media conversion between 100Base-TX and 100Base-FX. It can be used as a stand-alone device or with a standard 19” chassis as shown below. Product Overview <NOTE> The chassis is to be ordered separately. Product Features One-channel media conversion between 100Base-TX and 100Base-FX...
Media Converter Packing List When you unpack this product package, you will find the items listed below. Please inspect the contents, and report any apparent damage or missing items immediately to our authorized reseller. The Media Converter User’s Manual AC to DC Power Adaptor User’s Manual...
Media Converter One-Channel Media Converter Ports The Converter provides one TX port and one FX port. For the FX port, it provides options of Multi-mode fiber using SC, ST, VF-45, MT-RJ or LC connector or Single-mode fiber using SC or ST connector or WDM fiber using single SC connector For the TX port, it uses RJ-45 connector.
Media Converter Installation This chapter gives step-by-step installation instructions for the Converter. Selecting a Site for the Equipment As with any electric device, you should place the equipment where it will not be subjected to extreme temperatures, humidity, or electromagnetic interference.
Media Converter Installing in a Chassis The Converter can be fit into any of the expansion slots on a special designed chassis. First, install the converter onto a carrier supplied with the chassis: Step 1- Unscrew the carrier from the desired expansion slot on the chassis. Step 2- Fit the converter onto the carrier.