Reporter A1000 User Manual

Gsm alarm device

Advertisement

Quick Links

A1000 – GSM ALARM DEVICE

USER MANUAL

A1000-REV2.1-1604
FW-A1000v2.93
ERBAŞ
TEKNOLOJİ
1
www.erbasteknoloji.com
Innovative Solutions

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the A1000 and is the answer not in the manual?

Questions and answers

Summary of Contents for Reporter A1000

  • Page 1: User Manual

    A1000 – GSM ALARM DEVICE USER MANUAL A1000-REV2.1-1604 FW-A1000v2.93 ERBAŞ TEKNOLOJİ www.erbasteknoloji.com Innovative Solutions...
  • Page 2: Battery Life

    - Manufacturer does not guarantee battery life of the device operation. LIMITED LIABILITY - The buyer must agree that Reporter devices will reduce the risk of theft, burglary, fire or other dangers but do not guarantee against such events. - Manufacturer will not take any responsibility regarding personal or property or revenue loss while using devices.
  • Page 3 1. DESCRIPTION A1000 is a simple & easy to use GSM Alarm Device which sends SMS and calls you in case of alarm events & restorations. Alarm event occurs in case of NO and NC ports changes. Up to 3 numbers can be registered (1 admin, 2 users).
  • Page 4: Getting Started

    All settings and registered admin & user numbers are saved in device’s own EPROM memory. So, settings will not be deleted if battery or SIM card is removed. Device will continue with new batteries or new SIM Card with the last saved settings & numbers. 2.
  • Page 5 NC PORT (Port2): Connect two wires of your NC type device output or cable into terminal block 7 & 8. It does not matter which one is first. This port is a “Normally Closed” port and checks if there is any open-circuit between terminal 7 &...
  • Page 6 There should space character between independent commands e.g.: 1111<space>NEWP:1234<space>DEL1<space>DISABLE Device is case sensitive; please pay attention to text message ingredients. Attention: If you write the password wrong you will receive an SMS including “WRONG PSWR” text. In that case device will keep in configuration mode. Please wait until LED becomes solid again and send a configuration SMS with correct password.
  • Page 7: Troubleshooting

    Otherwise you will receive LOW BATTERY alarms with weekly repeat. Alarm occurred, I received SMS but Network signal was not enough on Check signal level of Reporter. didn’t receive a Call Reporter location or your own Check if you had a missed call while your mobile phones location.
  • Page 8: Technical Specifications

    Operating Temperature  C ~ + 50 Dimensions  109 x 58 x 31 mm  1 x A1000 GSM Alarm Device  1 x A9900 12V 1000mA Power Adaptor Package Content  1 x User Manual  4 x Fixing Screws & Fixing Plugs...

Table of Contents