Charging The; Unlocking Your - Logic X4.5 Lite User Manual

2. Remove the Device's battery.
3. Locate the Micro SD card slot and just slide-in the card with the gold
contacts facing down.
4. To remove the Micro SD card, just slide-out the card carefully to remove.
5. Replace the battery and the back cover.
Charging the Battery
1. Connect the wall charger to the included USB cable.
2. Connect the charger plug to the power outlet.
3. Connect the USB cable to the Device; once connected this icon
indicates the chargingstatus.
4. The battery is fully charged when the status icon changes to ; please
disconnectthe charger from the power outlet.
5. Disconnect the charger from the Device.
Note:If the battery isn't used for a long period of time or the battery is
depleted, the Device may not turn-on like normal while charging. This is
normal. Please charge for a while before turning on the Device.
The battery can be charged repeatedly; however, it is a consumable
product. Please purchase a new battery if you the notice a significant
reduction in the standby time.Using data services consumes more battery
power and will reduce the standby time.The charging time may be affected
by the temperature and battery usage.The Device will show a prompt if the
battery level is too low. The Device will power off automatically if the
battery level drops below a certain level.
Unlocking Your Device
LOGIC X4.5 Lite8