Ip white bullet camera 4 mega pixel, 3.6mm lens, p2p, upnp, poe (5 pages)
Summary of Contents for ZUUM LSB4MP-IP-2.8-IR30-WH
Page 1
HD Mini IR Waterproof Bullet Network Camera Quick Start Guide Version 1.0.0...
Page 2
Welcome Thank you for purchasing our Network camera! This user’s manual is designed to be a reference tool for your system. Please read the following safeguard and warnings carefully before you use this series product! Please keep this user’s manual for future reference! Important Safeguards and Warnings 1 ....
Page 3
The grounding holes of the product are recommended to be grounded to further enhance the reliability of the camera. Do not touch the CCD (CMOS) optic component directly. You can use the blower to clean the dust or dirt on the lens surface. Please use a dry cloth moistened by alcohol to wipe away the dust gently if it is necessary to clean.
Page 4
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: This device may not cause harmful interference; This device must accept any interference received, including interference that may cause undesired operation. 2. FCC compliance: This equipment has been tested and found to comply with the limits for a digital device, pursuant to part 15 of the FCC Rules.
1 Framework 1.1 Device External Cable You can refer to the following figure for cable information. See Figure 1-1. Figure 1-1 Cable Please refer to the following sheet for detailed information. Port Port name Connector Function description Connect to standard Ethernet cable. Ethernet Note: Network port...
2 Device Installation Note: The device installation steps may be different due to the different appearance and structure, please refer to 2.1 according to the actual product. Please make sure the installation surface can support 3X’S THE weight of the camera and the bracket.
Page 8
Figure 2-2 Step 5 Use cross screwdriver (in accessories bag) to loosen adjusting screw. Step 6 Adjust the device in all possible directions, and set its monitoring direction according to the requirements. Step 7 Use cross screwdriver to tighten the adjusting screws. Step 8 Waterproof connector installation for network port;...
3 Network Configuration The IP camera defaults to DHCP. If you are connecting directly to NVR the NVR will assign the IPC an IP address. If you are connecting IPC to XVR or hybrid DVR accepting IP camera or if camera is connected directly on network router make sure you change to a static IP.
Step 3) Modify the camera IP address on the “Net” interface, click “Save” to finish modification. See Figure 3-2 for more details. Figure 3-2 3.2 Login WEB Interface Note: Note: Different devices may have different WEB interfaces, the figures below are just for reference, please refer to our website for the latest documentation.
Page 11
Figure 3-3 Step 3) Install controls according to the system prompt; see Figure 3-4 for the WEB main interface. Please modify the administrator password as soon as possible after you successfully logged in. Figure 3-4 ZM111317...
Page 12
Note: This quick start guide is for reference only. Slight difference may be found in user interface. All the designs and software here are subject to change without prior written notice. All trademarks and registered trademarks mentioned are the properties of their respective owners.
Need help?
Do you have a question about the LSB4MP-IP-2.8-IR30-WH and is the answer not in the manual?
Questions and answers