CLS CAS 6 Luxeon K2-TFFC Manual

CLS Manuals
CLS CAS 6 Luxeon K2-TFFC
CLS CAS 6 Luxeon K2-TFFC
Version 2.0 November 2010
- 1 - www.cls-led.com
CLS Manuals
CLS Atmosphere LED-panel
INTRODUCTION
Thank you for choosing the CLS CAS 6 inground floodlight. The CLS CAS 6 floodlight is a compact but yet
powerful inground floodlight for numerous applications. The unit can be used for lighting up all sorts of
facades, objects and landscape lighting projects.
Available CLS CAS 6 floodlights
• 87215765 CLS CAS6 flood 6xK2-TFFC warm white 3150K 110-277V IP65
• 87215768 CLS CAS6 flood 6xK2-TFFC cold white 6700K 110-277V IP65 (not in stock)
Included items
The CLS CAS 6 is shipped in one package containing the following items:
• 1 x CLS CAS 6 inground floodlight
• 1 x CAS 6 Sleeve
• 1 x manual
Optional accessories
• 871992 CLS mold set, straight 8-26mm
• 87215773 CLS CAS 6 Spot Lens plate
• 872157 CLS CAS 9 frosted glass
Note: It is important to read this manual before you install this product.
SAFETY INFORMATION
Warning! This product is for professional use only, not for domestic use.
Read this manual before powering up or installing the CLS CAS 6. Follow the instructions listed
below and observe all warnings in this manual.
2007 CLS-LED BV. All rights reserved. Information subject to change without notice, CLS-LED BV and all affiliated
companies disclaim liability for injury, damage direct or indirect loss, consequential or economic loss or any other
loss occasioned by the use of, inability to use or reliance on the information contained in this manual. No part
of this manual may be reproduced, in any form or by any means, without permission in writing from CLS-LED
BV. Other legal information can be found in our General conditions to be found on the back of your CLS-LED BV
invoice or on our website www.cls-led.com/conditions.pdf
Protection from electric shock
• Disconnect the power supply from AC power before installing, dismounting or maintaining the unit.
• Make sure all connectors are connected properly.
• Use only a source of AC power that complies with local building and electrical codes and has both
overload and ground-fault protection.
• Refer all service to a qualified technician.
- 2 - www.cls-led.com