sfty Sense Quick Installation page 8

The BlinkUp process
10
A
Wi-Fi light must flash yellow or
white when BlinkUp starts. If it
doesn't, take out one battery,
wait 10 seconds and reinsert
it. You have now about 25
seconds to start BlinkUp.
B
As BlinkUp starts counting down,
place the screen of your phone
over the test-button (see-through
square). When your phone starts
flashing, the Wi-Fi lamp should stop
While the Sense is still flashing, tap
start BlinkUp. Place your phone on
the Sense as shown in picture
BlinkUp will start after a countdown.
blinking.
C
The Wi-Fi lamp will confirm with one
green blink if the BlinkUp was
successful. If you provided the right
password and the Wi-Fi is working -
you should now see Sense trying to
connect.
and
11