Port Connections - Real Time Automation 460EAV User Manual

460 Gateway Device Line 460EAV

Port Connections

The factory default port settings on the 460EAV gateway are for Port 0 (T-strip) to be set to RS485 and
Power while Port 1 (DB-9) is set to RS232 by default.
If these default port settings are incompatible with your equipment they can be configured differently. For
assistance changing port configurations contact our customer support department. For specific jumper and
pin settings refer to the end of this manual, appendix A.
Real Time Automation, Inc. 3 1-800-249-1612