5F., NO.6, Lane 130, Min-Chuan Rd., Hsin-Tien City, Taipei County, Taiwan Declare that the product 802.11g Hi Power Multifunction AP/Router AirLive WL-5470POE is in conformity with In accordance with 89/336 EEC-EMC Directive and 1999/5 EC-R & TTE Directive Clause Description ■...
Page 3
Directiva 1999/5/CE. disposiciones aplicables o exigibles de la Directiva 1999/5/CE. ΜΕ ΤΗΝ ΠΑΡΟΥΣΑ OvisLink Corp. ΔΗΛΩΝΕΙ OvisLink Corp izjavlja, da je ta AirLive WL-5470POE Ελληνική [Greek] ΟΤΙ AirLive WL-5470POE ΣΥΜΜΟΡΦΩΝΕΤΑΙ Slovensko v skladu z bistvenimi zahtevami in ostalimi ΠΡΟΣ...
Page 4
FCC RF Radiation Exposure Statement This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body. AirLive WL-5470POE User’s Manual...
This is a Class B product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures. Hereby, Air Live, declares that this device is in compliance with the essential requirement and other relevant provisions of the R&TTE Driective 1999/5/EC.
Introduction . WL-5470POE is world's most popular multi-function access point. It features an impressive total of 7 wireless multi-function modes that are not available in normal access point. In addition, the ACK timeout and RSSI feature makes it suitable for long distance application. From ordinary AP application to Hotspot and WISP usage, you will find the WL-5470POE is the device you want.
Turn solid light when Bridge or Bridge/ Repeater Green Solid Repeater is enabled. Repeater indicator LAN 1 An active station is connected to the Link activity Green Blinking corresponding LAN port. LAN 2 Table 1: LED Indicators AirLive WL-5470POE User’s Manual...
Page 10
Press over 3 seconds to reboot this device. Press for over 10 seconds to restore factory settings. Reset Performing the Factory Reset will erase all previously entered device settings. Ant. Connects antenna. Table 2: Connection Ports AirLive WL-5470POE User’s Manual...
Please set your PC's IP to the same subnet as the AP to access the AP. In WISP, mode, the default DHCP server is enabled. Please restart your PC to renew the IP address. DHCP Server IP Range 192.168.100.100~192.168.100.200 Table 3: Default Setting AirLive WL-5470POE User’s Manual...
4. Please make sure your computer IP is in the same subnet as the AP (i.e. 192.168.100.x). 5. please make sure your computer has wireless network adapter installed. 6. Open the web browser and enter http://192.168.100.252/. AirLive WL-5470POE User’s Manual...
All stations can have the Internet access if only the Access Point has the Internet connection. See the sample application below. To set the operation mode to “Access Point”, please go to “Mode AP” and click the Setup button. AirLive WL-5470POE User’s Manual...
Need help?
Do you have a question about the WL-5470POE and is the answer not in the manual?
Questions and answers