Best Wireless Dog Fence Instruction Manual page 9

CHARGING THE PET COLLAR RECEIVER
NOTE: It is important to charge the Pet Collar Receiver for at least 1
hour or until fully charged prior to using the system for the first time.
WARNING: THE PET COLLAR RECEIVER SHOULD ONLY BE
CHARGED BY INSERTING INTO THE CHARGING PORT ON TOP
OF THE WI-FI FENCE TRANSMITTER
1. Remove the Pet Collar Receiver and Pet Collar Receiver USB
Charging Cord from the product packaging.
2. Insert the USB Connection for the charging cord into the top of
the Wi-Fi Fence Transmitter.
The charging port on the Pet Collar Receiver is located on the back
of the device under a rubber water resistant cover.
3. Remove the rubber cover and insert the small circular connector
of the USB Charging Cord into this port to begin charging the Pet
Collar Receiver. The LED light on the front of the Pet Collar Receiver
will flash to indicate it is charging.
4. Hang the Pet Collar Receiver on the storage hooks on the front of
the Transmitter Wall Mounting Plate.
5. When the Pet Collar Receiver is fully charged, the LED light will
turn solid red.