Best Wireless Dog Fence Instruction Manual page 8

SYSTEM INSTALLATION
Mounting the Fence Transmitter
1. Remove the Transmitter Wall Mounting Plate and Transmitter
Mounting Hardware from the product packaging.
2. Using a pencil and a spirit level, make sure your measurements
are level and mark a 4-inch (10 cm) line on the wall in your desired
mounting location.
3. Use the screw holes located on the Transmitter Wall Mounting
Plate as a template and mark the screw locations along the 4-inch
line you have just drawn.
4. With a power drill and ¼ drill bit, drill pilot holes in to the wall at
the screw location you have just marked.
5. Insert the wall anchors into the holes you have just drilled.
6. Place the Transmitter Wall Mounting Plate on the wall and align
the screw holes with the wall anchors.
7. Secure the Transmitter Wall Mounting Plate to the wall by screw-
ing the screws provided through the screw holes in the Transmitter
Wall Mounting Plate and into the wall anchors.
8. Mount the Wi-Fi Fence Transmitter to the mounting plate by in-
serting the two prongs on the upper corners of the mounting plate
into the back of the Wi-Fi Fence Transmitter.
9. Remove the Transmitter Power Adapter from the packaging.
Insert the circular connector into the top of the fence transmitter,
then plug into a wall outlet.
NOTE: If necessary, consider using an extension cord of the correct
gauge to provide power to the ideal transmitter location.