Page 2
For more information on installation and configuration (including transitioning to Bridge-Mode), see the iPrism Installation Guide available on the iPrism support page at: http://supportdocs.edgewave.com. Step 1. Record Setup Data for the iPrism Installation Wizard This table applies to all iPrism h-Series Models, 15h, 25h, 35h, 55h & 105h...
Page 3
iPrism Web Security Quick Start Guide V6.52X / V7.0 Models 35h, 55h, 105h - LCD Panel Connect one end of the white Ethernet Cable to the iPrism’s internal interface and the other end to a switch in your LAN. Important: Do not connect the external side of the iPrism at this point Power up your iPrism by pressing and holding the red power button.