Fitting; In Use - Silvercrest SSMN 2 B3 Operating Instructions Manual

Fitting

1) Place the appliance around your neck so that the massage heads
the sides of the neck. You can use the hand loops
The control panel with the buttons must be on your right.

In use

Preferably, lie back for the massage and relax. Provide for a relaxing atmosphere.
For example, dim the lights a little.
NOTICE
► Ensure that you experience the massage as comfortable and relaxing.
If needs be, vary the pressure and/or your position. Stop the massage
immediately if it is painful or uncomfortable.
NOTICE
► Never use the appliance for more than 15 minutes. A longer massage
may lead to tension caused by overstimulation of the muscles.
You can select between 2 functions:
–
Shiatsu massage with the massage heads
–
Warmth (2 of the massage heads
You can combine various massage functions with each other or use them indi-
vidually:
■ Press the "On / Off" button
slow massage.
■ Press the button "Massage"
the button "Massage"
■ Press the "Warmth" button
button
ton
heads
NOTICE
► Once you have switched the warmth function on and the massage heads
rotating and you then stop the massage heads
the warmth function also turns off at the same time. If you want to use the
warmth function again, press the "Warmth" button
warmth function.
│ GB │ IE │ NI
■ 8
once again to stop the massage heads
and the massage heads
again to switch the warmth function off. The light on the massage
as well as the button "Warmth" button
to align it.
(fast and slow)
illuminate and warm up)
. The massage heads
to increase the massage speed. Press
, to switch the warmth on. The "Warmth"
light up. Press the "Warmth" but-
by pressing "Massage"
lie on
begin with the
.
goes out.
are
,
to reactivate the
SSMN 2 B3