Notification Light Identification - Samsung EI-AN920 User Manual

Hide thumbs Also See for EI-AN920:
Table of Contents

Advertisement

Getting started
Connecting the charger improperly may cause serious damage to the tracker. Any
damage caused by misuse is not covered by the warranty.
• Y ou can charge the tracker using the charger (sold separately).
• T he tracker can be used while it is charging, but it may take longer to fully charge
the battery.
• W hile charging, the tracker may heat up. This is normal and should not affect the
tracker's lifespan or performance. If the battery gets hotter than usual, the charger
may stop charging.
• I f the tracker is not charging properly, take the tracker and the charger to a
Samsung Service Centre.
3
After fully charging, first unplug the USB cable from the charging dock, and then unplug
it from the electric socket.
• T o save energy, unplug the charger when not in use. The charger does not have a
power switch, so you must unplug the charger from the electric socket when not in
use to avoid wasting power. The charger should remain close to the electric socket
and easily accessible while charging.
• T he socket-outlet shall be installed near the equipment and shall be easily
accessible.

Notification light identification

The notification light informs you of your tracker's status.
Status
Charging
Fully charged
During use or in
sleep mode
If the notification light does not work as described, disconnect the charger from the
tracker and reconnect it.
Colour
• C ontinuously on red
• C ontinuously on green
• O ff
7

Advertisement

Table of Contents
loading

Table of Contents