Adjusting The Device; Terminal Resistor - ABB 83220 AP-5 series Product Manual

ABB-Welcome
Pos: 70 /Di nA4 - A nleitu ngen Onlin e/Ueb ersc hrift en/2 ./Ge raet eeins tellun gen @ 1 8\mo d_1 302 768 847 744 _15. docx @ 10 354 8 @ 2 @ 1
4.4

Adjusting the device

Pos: 71 /Di nA4 - A nleitu ngen Onlin e/Ueb ersc hrift en/3 ./Abschl usswide rsta nd @ 19\ mod _13 219 5807 990 6_1 5.do cx @ 1100 83 @ 3 @ 1
Pos: 72 /Di nA4 - A nleitu ngen Onlin e/In halt/KNX/Do orEnt ry/Bedie nun g/Abschl usswide rsta nd s etzen 83 220 -AP-xxx @ 19\ mod _13 1072 339 236 9_1 5.do cx @ 1 078 41 @ @ 1
4.4.1

Terminal resistor

Fig. 35: Terminal resistor
Pos: 74 /Di nA4 - A nleitu ngen Onlin e/In halt/KNX/Do orEnt ry/Bedie nun g/M aste r/Slave Sc halte r setz en 832 20-AP-xxx @ 1 9\m od_1 310 723 320 966 _15. docx @ 10 783 3 @ @
No. Functions
1 Station
Select switch to set the address of default outdoor station.
2 X10 X1
Select switches to set the address (0-99) of the indoor station.
Setting hundreds ,see Chapter 4.2.12.15 "setup".
3 Master/slave function
Only one indoor station in each apartment should be set as "master"
(Switch should be set as "M/S on.") All additional indoor stations in the
same apartment must be set as "slave" (Switch should be set as "M/S
off.")
4 Terminal resistor
In video installations or mixed audio and video installations, the switch
should be set as "RC on" on the last device of the line.
| — 54 —