Leave Home Management - ABB 83220 AP-5 series Product Manual

ABB-Welcome

4.2.12.5 Leave home management

1
2
Fig. 22 Leave hom e m anagem ent
Information about the settings
User can only choose "call forward" or "message leaving". Two functions can't be
activated at the same time!
A warning will be given once "call transfer" or "message leaving" is activated.
The "Leave home management" menu has the following functions: (The function can
only be set in master indoor station.)
No. Functions
1 Call forward
- Tick the checkbox to activate or deactivate the call forward command.
- Choose the target type through the drop-down menu.
- Tick address numeric keyboard to edit the address if a call type comes
from an indoor station.
If the call forward function is activated, the auto unlock function will
-
be disabled.
2 Message leaving
- Tick the checkbox to activate or deactivate the call forward.
If the messages leaving function is activated, the auto unlock
-
function will be disabled.
|
Forward After(sec):
— 34 —
5
4
3