Configuring The Miner; Setting Up The Pool - BITMAIN AntMiner D3 Installation Manual

4. Configuring the Miner

4.1 Setting Up the Pool

To configure the miner:
1. In Miner Configuration, click General Settings.
2. Set the options according to the following table:
Option
Pool URL Enter the URL of your desired pool.
Worker Your worker ID on the selected pool.
Password The password for your selected worker.
3. Click Save & Apply.
The AntMiner D3 can be set up with three mining pools, with decreasing
priority from the first pool (pool 1) to the third pool (pool 3).
The pools with low priority will only be used if all higher priority pools are
offline.
- 11 -
AntMinerD3InstallationGuide
4. Configuring the Miner
Description