Assembling The Obstacles - Brookstone Flight Force Safety And Operating Instructions Manual

ASSEMBLING THE OBSTACLES

The obstacles are pre-cut on three foam core boards .
Before assembling, remove each piece and pop out the foam from the pre-cut slots .
1 2 3
14
4 5 6 7
To assemble the landing pad:
1 . Align the tabs in Part 1 (4 pieces) with the slots in the bottom of Part 2 and push to
attach .
To assemble the stunt ring:
1 . Bend the ends of Part 5 along the pre-creased lines .
2 . Align the slots in Part 5 with the slots in Part 3 and push to attach .
To assemble the course flag:
1 . Align the slot on Part 4 with the slot on the bottom of Part 6 and push to attach .
2 . Align the slots in Part 7 with the tabs in the combined Part 4 and Part 6 and push
to attach .
15