They are tough and will easily handle even the harshest grow room environments. Before use, please read these instructions carefully and save them for future reference. For information on additional Active Air products please visit Hydrofarm.com. SPECIFICATIONS Voltage AC 120V/60Hz...
PARTS LIST - (WHAT’S IN THE BOX) PARTS LIST 8. Back guard 15. Inner pipe 1. Securing nut 9. Motor shaft 16. Height adjustment screw 2. Securing bolt 10. Motor 17. Outer pipe 3. Decorative cover 11. Speed control 18. Base 4.
IMPORTANT SAFEGUARDS When using your pedestal fan, basic precautions should always be followed, including the following: • This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
ASSEMBLY INSTRUCTIONS Before first use, please follow these instructions: • Remove all packing and any labels. • Making sure that your pedestal fan is in good condition. It must have no cracks on the unit and no damage to the cord/plug. ASSEMBLY 1.
OPERATING INSTRUCTIONS • Turn the speed control to select speeds: 0 (off) and speeds I (Low), II (Middle), III (High). • The pedestal fan can operate in oscillation or stationary mode. Press the oscillation knob down to activate the oscillating mode. To stop oscillation, pull the knob upward. •...
Hydrofarm will, at our discretion, repair or replace the ACFP1016 covered under this warranty if it is returned to the original place of purchase. To request warranty service, please return the ACFP1016, with original sales receipt and original packaging, to your place of purchase.
Need help?
Do you have a question about the Active Air ACFP1016 and is the answer not in the manual?
Questions and answers