Table of Contents
Advertisement
Account to Manage This Device
Administrator
Set the access point's administrator name. This is used to log
Name
in to the browser based configuration interface and must be
between 4-16 alphanumeric characters (case sensitive).
Administrator
Set the access point's administrator password. This is used to
Password
log in to the browser based configuration interface and must
be between 4-32 alphanumeric characters (case sensitive).
Management
This feature allows you to determine who is able to manage
IP Lock
the whole system.
Disable (Default): All that have the administrator name and
password can manage the system.
Enable: Up to 3 computers / devices can manage the system.
The 3 computers / devices are allocated according to the
settings shown below:
Use the drop down menu in the Action column to enable /
disable the IP addresses. When Enable is selected, enter the
IP Address and Subnet Mask.
The Frontdesk account is for creating guest accounts and ticket printing only.
Front Desktop Account
Name
Set the system's front desktop account name.
Password
Set the system's front desktop account password.
Advanced Settings
HTTP Port
Specify an HTTP Port
HTTPS Port
Specify an HTTPS Port
Management
Check/uncheck the boxes to enable/disable specified
Protocol
management interfaces (see below).
Login Timeout Specify the idle time (in minutes) before being kicked from
the server.
HTTP
Internet browser HTTP protocol management interface
112
Office 1-2-3 Interface
Advertisement
Table of Contents
