Table of Contents
Advertisement
Fig 1 GetMagic buttons functions
3 Technical Information
Hardware specification:
Power: ~110/220 V, 0.6 A, 50/60 Hz (indoor usage only, 40° C max)
•
Connectivity: Ethernet (RJ45) and/or WiFi
•
Connectivity to nodes: Z-Wave, ZigBee and IP
•
Buttons with LED indication for on device configuration
•
USB for external storage
•
4 GetMagic System configuration
The system configuration consists of four major steps:
Connecting the gateway to home network
•
Registering user account
•
Adding gateway to user account
•
Home setup
•
4.1 Connecting the gateway to home network
The gateway is connected to the local home network using Ethernet or WiFi connections. After being plugged in
an electrical plug, the gateway will start operation and will connect to the home network using Ethernet, if
connected to a working Ethernet RJ45 cable. If not available, it will start in WiFi AP mode, used only for WiFi
network configuration. While the gateway is in AP mode, all three green LEDs will blink. To access the gateway
configuration page connect to the gateway AP with the mobile phone. The gateway SSID will be presented with a
name that will be displayed in the gateway with the label " GetMagic..." as prefix. Connect to that AP and then
type the URL: " http://getmagic.setup " in the phone browser. The loaded page will allow entering SSID and
passkey of home network. The Internet connection is required to register the gateway in the cloud service so
the gateway can be activated and receive future software updates.
4.2 Registering User account
The user account allows the user to authenticate its gateways and mobile applications to the GetMagic system.
Gateways added to one user account are not accessible to other users. The user account name is the email
address required for account registration. Registration of the account can be done in the client application or
trough the web application available at
To create the user account from the client application the user must ensure the mobile device is connected to
the local WiFi and then must start the GetMagic application.
At
https://getmagic.telesystem.digital
steps of the new account wizard. GetMagic requires entering a valid email address for user name. This email
address will be used to send an account activation link. Additional legal information is provided by clicking
" Terms of services ". In order to proceed accept terms of services.
https://getmagic.telesystem.digital
or in GetMagic app select the option " Create new account " and follow the
TELE System - IoT
4
Advertisement
Table of Contents
