Table of Contents
Advertisement
5.2.4.1 Inclusion/Add a new device
1.
To include/add device press " Find devices " button. Action will open networks for device inclusion. Counter next
to button will show time in seconds until networks are closed.
2.
Perform inclusion action on device. This may defer from device to device. Consult device instruction manual.
Instruction how to include fully supported device can also be found by pressing help option in top-right corner of
the screen.
3.
When device is added to network it will show at the top of the device list.
4.
Performing short click on device allows providing device symbolic name and selecting device location.
5.2.4.2 Remove device
1.
To remove device perform long click operation on device and select " Delete " option.
2.
Depending on device type ZigBee or Z-Wave follow up procedure can defer:
a.
In case of ZigBee device only confirmation to delete device is required.
b.
In case of Z-Wave devices network will be opened for exclusion. After network is opened manual action
on device is required. To remove device follow up procedure from device manual.
5.2.4.3 Excluding device from previous network
1.
Press settings menu icon
2.
When dialog is opened, network is opened for exclusion. Execute exclusion procedure on device. More
information can be found in devices user manual.
5.2.4.4 Updating device name and location
By default new device will get predefined name which consists of device type and ID. Device is not assigned to
any room. To update parameters (see Fig 5):
1.
Perform short click on device.
On device information dialog update " Name ".
2.
Select device location from " Location " drop down menu (see Fig 5).
3.
Fig 5 Device editing
(in top-right corner and select " Exclude device " option.
TELE System - IoT
10
Advertisement
Table of Contents
