Table of Contents
Advertisement
Energy saving cooling mode
This mode minimizes power consumption dur-
ing cooling and increases the set temperature
to the optimal level for a more comfortable en-
vironment.
|
1
Press
to turn the power on.
q
2
Press
repeatedly to select the cooling
operation.
3
Press
.
G
-
is displayed on the display screen.
!
NOTE
• This function may not be supported,
depending on the model.
• Possible, Different temperature is dis-
played on between remote controller and
air conditioner during operation.
Display screen brightness
You can adjust the brightness of the indoor
unit display screen.
1
Press
to turn on/off the indoor unit dis-
play.
!
NOTE
This function may not be supported,
depending on the model.
ADVANCED FUNCTIONS
Operating the air conditioner
without the remote control
You can use the On/Off button of the indoor
unit to operate the air conditioner when the
remote control is unavailable. However, the
fan speed is set to high.
In case of turning On
1
Open the front panel.
- Lift up both sides of the panel slightly.
2
Press the On/Off button.
3
Close the front panel as soon as you press
on/off button.
- Push down both sides of the panel
slightly.
* The feature can be changed according a
type of model.
- For cooling and heating models, the oper-
ation mode changes, depending on the
room temperature.
Room temp.
Set temp.
Below 21°C
Above 21°C
and below
24°C
Above 24°C
- For cooling-only models, the temperature
is set to 22°C.
15
Operation
mode
Heating
24°C
operation
Dehumidify-
23°C
ing operation
Cooling
22°C
operation
Advertisement
Table of Contents
