Table of Contents
Advertisement
Ethernet Mode
Ethernet mode allows you to select the speed of your Ethernet connection. Modes
include—auto, 100 full, 100 half, 10 full and 10 half. If you select "auto" then the
router will use the common mode that all the connected interfaces can operate at.
NAT
If you enable NAT (Network Address Translation), you can configure the Virtual
Server, Port Triggering, and DMZ Host.
Virtual Servers
A virtual server allows you to direct incoming traffic from the WAN side to a
specific IP address on the LAN side. The following figure shows the screen that
allows you to configure your virtual server(s). Click on the Add button to configure
a virtual server.
Zhone 4-Port Wireless Ethernet Router
30
User Manual
Version 1.0
Document #: BD-ZU0011-10
Advertisement
Table of Contents
