Opel R15 BT USB Infotainment Manual page 86

86 Navigation
Note
Follow the regulations of the country
in which you are driving.
Period charge: To include or exclude
roads which require a special license
to be purchased for certain periods.
Per-use toll: To include or exclude
roads for which a toll must be paid to
use the road once only.
Ferries: To include or exclude the use
of ferries, ships and trains.
Carpool/HOV: To include or exclude
carpool lanes and high-occupancy
vehicle (HOV) lanes.
Unpaved roads: To include or
exclude the use of unpaved roads,
e.g. dirt, gravel roads.
Map settings
Select Map settings to access the
following:
● View mode (3D/2D/2D North)
2D North is available depending
on version.
● Viewpoint (Low/Normal/High)
● Motorway view (On/Off)
● POI markers
Alternatively, when the map is
displayed (no route guidance is
active), the Map settings menu can be
accessed by touching Options.
Refer to (NAVI 50 IntelliLink)
"Information on the display", "Map
screen" above for further information.
View mode: Select View mode to
change the default map mode
between a 2D top-down view, a 3D
perspective view and a 2D view with
North always facing upwards.
Alternatively, touch the Compass on
the map to switch between map view
modes.
Viewpoint: Select Viewpoint to raise
or lower the map view.
Alternatively, when the map is
displayed (no route guidance is
active), touch ⇧/⇩ to raise or lower the
map view. They are greyed-out when
the maximum position is reached.
Motorway view: Select Motorway
view to switch on/off the motorway
junction view for route guidance.
Refer to (NAVI 50 IntelliLink)
"Information on the display", "Map
screen" above for further information.
POI markers: Select l alongside POI
markers to display a list of Points of
Interest (POI) types.
Use this screen to switch on/off (show
or hide on map) certain POI type
markers on the map, e.g.
accommodation, airport, café or bar.
Select a POI type to open a list of its
subcategories and switch on/off
(show or hide) individual
subcategories.
Note
POIs are only visible on the map
depending on the zoom level.
Voice settings
Select Voice Settings to change voice
guidance language.
Scroll the list of languages by
touching R/S then select a language
and touch OK to confirm selection.
Coordinate format
Select Coordinate format to change
the format of co-ordinate entries to
one of the following options:
● DD.DDDDD
● DD MM.MMM
● DD MM SS.S