Advertisement
Sensor Daily Use
The Trawl Explorer sensor automatically
starts when in sea water. It switches to
Bluetooth mode when out of water. When
in Bluetooth, the sensor turns off after 10 minutes
if there is no user action.
When the sensor is not in operation, look at the
transducer LED to make sure that the unit is not in
running mode and discharging the batteries.
Rinse the sensor with fresh water between
uses, especially the shoulder bolts (see
illustration p.1). You can do it when the
sensor is in running mode out of water. Dry the
charging bolt afterwards.
The operational life time can be up to
75 hours depending on the power uplink
settings.
Trawl Explorer sensors has Lithium-Ion batteries.
Charge them with Marport Basic Sensor Charger or
Multi-Charger.
Offices
Parc Technologique de Soye,
Espace MEDIA, 2 Rue Galilée
56270 Ploemeur, France
supportfrance@marport.com
36208 Vigo (Pontevedra), Spain
supportspain@marport.com
© 2016-2017 Marport. All Rights reserved.
No part of this document may be reproduced, stored in a retrieval system or transmitted in any form by any means; electronic, mechanical, photocopying
or otherwise, without the express written permission from Marport. "Marport", the Marport logo and Software Defined Sonar are registered trademarks
of Marport. All other brands, products and company names mentioned are the trademark and property of its respective owners only. Marport is a division
of Airmar Technology Corporation.
Trawl Explorer Quick Reference Guide
France
Marport France SAS
Spain
Marport Spain SRL
Camino Chouzo 1
Maintenance
External
•
Check that all attachment equipment are not
worn or torn. Replace when appropriate.
•
Make sure that Trawl Explorer sensor is clean.
Remove debris with a piece of wood or fine
grade sandpaper. Wash away mud or debris
with warm water but do not use highly abrasive
materials.
Be careful with the sensor. Sensors and
components
are
sensitive
contamination.
Internal
Only an approved Marport dealer can get access
to the internal unit. Warranty will become void if
anyone other than an approved dealer tries to do
internal maintenance duties on the Trawl Explorer
sensors.
Dealers, please refer to the Trawl Explorer service
manual for more detailed maintenance instructions.
Marport recommends you to return Trawl Explorer
sensors to an approved Marport dealer every
2 years for maintenance.
To ensure proper and safe use of this equipment,
carefully read and follow the instructions in the
Trawl Explorer user manual.
Iceland
Marport EHF
Fossaleyni 16
112 Reykjavík, Iceland
supporticeland@marport.com
USA
Marport Americas Inc. USA
12123 Harbour Reach Drive
Mukilteo, WA 98275 USA
supportusa@marport.com
TE_qrg / Rev1
to
shocks
and
4
Advertisement
