Table of Contents
Advertisement
Compatibility
The 7060, 7064, 7070, and 7075 keypads are compatible with XRSuper6, XR20, XR40, XR200, XR2400F, XR200-485,
XR500 Series, and XR2500F Command Processor™ Panels. The table shows the various panel types and required
operating modes for the arming/disarming feature as well as the appropriate 4 or 5-digit code configuration for each
panel.
Operation
Arms H/A
Disarms H/A
Arms A/P
Disarms A/P
Arms Area(s)
Disarms Area(s)
* During entry delay only.
FCC Information
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications made by the user and not expressly approved by the party responsible for compliance could
void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Specifications
Operating Voltage
7060 Current Draw
Normal Standby
Alarm
7064 Current Draw
Normal Standby
Alarm
7070 Current Draw
Normal Standby
Alarm
7075 Current Draw
Normal Standby
Alarm
Dimensions
XRSuper6
XR20/XR40 XR200/XR2400F
4-digit
4-digit
4-digit
4-digit
N/A
N/A
4-digit
4-digit
N/A
N/A
N/A
4-digit*
12 VDC Nominal
____mA
____mA
____mA
____mA
____mA
+ 1.6mA per active zone
____mA
+ 2mA per active zone
____mA
+ 1.6mA per active zone
____mA
+ 2mA per active zone
7" W x 5" H x 1/2" D
800-641-4282
www.dmp.com
Made in the USA
XR200-485/XR500 Series/XR2500F
4-digit
4-digit
N/A
5-digit
N/A
5-digit*
Accessories
Backboxes
695 or 696 4" square mounting box
777 protective keypad cover
Keypad Wiring Harness
300 4-wire harness
300-5 5-wire harness
300-12 12-wire harness
300-512 12-wire harness, 5 ft. long
Proximity Credentials
1410 Prox Card for DMP Prox
1415 Prox PVC Photobadge for DMP Prox
1420 Prox Key Fob for DMP Prox
1425 Prox Patch for DMP Prox
Listings and Approvals
FCC Part 15 Certified
INT RUSI ON • FIRE • AC C ESS • NETWO RKS
2500 North Partnership Boulevard
Springfield, Missouri 65803-8877
N/A
N/A
N/A
N/A
N/A
5-digit
Advertisement
Table of Contents
