BonSayOn H501 Genie Duet User Manual page 9

Install Helmet Earphone
1. Remove the protection film from the self-adhesive tapes
2. Attach the Velcro onto your helmet stripe.
3. Clip H501 on the Velcro and plug into earphone.
4. Installation complete.
Velcro
on the back of the earphones and attached
to inner side of the helmet. Adjust
earphones to a comfortable position
close to your ears.
Velcro
Helmet
Earphone
H501
Clip the H501 onto your
helmet strip. For best results,
allow the H501 to rest
comfortably between
throat and helmet stripe when
using Silent Mode.
the
8