XXXX
The basic version Repair Manual
Chapter 4 PCBA Component Location
:
Explain
1. All PCBA host will need to provide a positive and negative picture, need to
mark the main device on a PCBA board, tagging content includes: No., device
name, damage caused by fault phenomenon.
2. Image requirements to clear: for the device image annotation, users can
find the real position corresponding to the need to use "; the picture frame
drawing canvas".
3.The picture on the label and instructions corresponding to the characters
must be editable.
Huawei confidential, not to spread without permission
2013-09-25
V1.0
Diagram
internal public
第 9 页,共 79 页