Reset And Troubleshooting - Guangxi Jiaway Q10 User Manual

Reset and troubleshooting

Reset the projector:
Press the reset button when the projector being
powered. Then it will turn off. Press the power button
by user to turn it on after reset the projector.
Troubleshooting:
Q The projected image is blurry.
A Adjust the focus wheel on the projector to
fine-tune the picture. Also check that the surface you
are projecting on is smooth.
Q The projected image is too small.
A Move the projector farther away from the
projection surface.
Q The projector is not projecting.
A Here are several things to check if your projector
is not projecting:
- If on battery power, check the battery life remaining
by pressing the power button. If battery power is low,
plug into AC power.
１３