Caution • TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER. THERE ARE NO SERVICEABLE PARTS INSIDE • TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. The lightning flash with arrow-head symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated “dangerous volta- ge”within the units enclosure that may be of suff-...
Page 4
Danger To reduce the risk of electric shock, burns, fire or injury: 1. Do not use while bathing or in a shower. 2. Do not place or store unit where it can fall or be pulled into a tub or sink.
Page 5
9. Do not overload electrical outlet.Use only the power source as indicated. 10. Do not carry this unit by cord or use cord as handle. 11. Never operate this unit if it has a damaged cord or plug, if it is not working properly, or if it has been dropped or damaged, or drop- ped into water.
Warning! This product contains a rechargeable battery 1)Do not store this product in high temperatures, damp areas, or in direct sunlight. 2)Never disassemble the product. 3)Never dispose of the product in fire or water, which may result in explosion and/or injury. 4)Keep product out of reach of children.
FCC INFORMATION NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Page 8
- Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
Page 9
shall be installed and operated with minimum distance 20cm between the radiator & body. 8...
Location of parts and control LENS Menu Key ① ⑧ infrared receiving Mode selection ② ⑨ 3.5mm Audio Out Home button ③ ⑩ ⑪ TF card reader OK Button ④ ⑫ USB Port Power Button ⑤ ⑬ Reset Button Return Button ⑥...
Remote controller Power On:Long pressing power button 3seconds, or press the ON/OFF key on the remote controller, projector will be turn on. Power Off: Long pressing power button 3seconds, or press the ON/OFF key on the remote controller, projector will remind shutdown. 10...
Reset and troubleshooting Reset the projector: Press the reset button when the projector being powered. Then it will turn off. Press the power button by user to turn it on after reset the projector. Troubleshooting: The projected image is blurry. Adjust the focus wheel on the projector to fine-tune the picture.
Page 15
- If on AC power, check that the AC power is plugged into the correct port on the projector and the AC adapter is securely plugged into a powered outlet. - If using a wired connection, check the compatibility section of this manual to ensure you are using any necessary adapters to connect your device.
Power charging The projector has one micro-USB port which can be using for your power charging port. Power Bank function: The projector also got one standard USB port which can be a power output source to charge a variety of smart phones. 15...
Internet setting Open“WLAN” Choose wireless signal which was received, input the password for the connection. Remark:after inputting password by remote,press “return”for closing the keyboard. 16...
Page 18
Bluetooth Setting Open the "bluetooth" choice of bluetooth devices to connect; After the success of matching, It will display "connected" 17...
IOS wireless screen mirroring Using the happycast software inside the device can help you share the screen wirelessly from apple device to our projector. Make sure iphone and projector device connect to the same WIFI ,If you have dual band router, we suggest that you may connect to 5G WIFI: ...
Android wireless screen mirroring This application help user to make the screen share from Android phone or android tablet to our projector. This function require the android Phone or Tablet PC support Miracast function. The steps below: 1、 make sure that all the related devices’WIFI are turning on, then open the “WIFIDISPLAY”APP in the projector.
Wireless Screen Share-PC Screen Share 1)Use the happycast software inside the device can help you share the screen between PC and projector 2)Make sure the mobile phone and projector device connect the same WIFI , If you have dual band router ,we suggest that you may connect to 5G WIFI.
One year limited warranty We warrant this product against defects in materials and/or workmanship under normal use for a period of ONE (1) YEAR from the date of purchase by the original purchaser (“Warranty Period”). If a defect arises and a valid claim is received within the Warranty Period, at its option, we will either 1) repair the defect at no charge, using new or refurbished replacement parts, or 2) replace the product with a new product that is at least function-...
Page 23
This Limited Warranty applies only to the products manufactured or sold by us that can be identified by our trademark, trade na- me,or logo affixed to them or their packaging. The Limited Warranty does not apply to any other products that are not man- ufactured or sold by us.
Page 24
Some country/states disallow the exclusion or limitation of inci- dental or consequential damages or how long an implied warra- nty lasts, so the above exclusions or limitations may not apply to you. This warranty gives you specific legal rights and you may also have other rights, which vary from country to country(state to state).
Need help?
Do you have a question about the Q10 and is the answer not in the manual?
Questions and answers